http://expert.concreteproducts.com/admixtures Just another ATE weblog Tue, 24 Jul 2007 15:29:13 +0000 http://backend.userland.com/rss092 en I am looking at a product called EPoxy Toxy as a possible solution for resurfacing my concrete dirve. Have you ever worked with an epoxy compound like this and what were the results. Most resurfacing i have seen done with concrete based products crack and flake over time. Does ... http://expert.concreteproducts.com/admixtures/2007/07/24/resurfacing-concrete/ I am doing a renovation of an old building. The entire outter wall has dampness while rainy season. I hava planed to chipe off the outside plastering completly and redo the same. what method and admixture i have to adopt while redoing plastering works, so as to arrest the seepage ... http://expert.concreteproducts.com/admixtures/2007/07/18/admixtures-for-plastering/ Hello BruceMy company is called Cemstone,we produce mainly wet cast cladding and paving products,cast into polyurethane moulds,vibrated and stacked to dry.We spray our releasing oil with a compressor onto the moulds,turning them face down to get rid of excess releasing oil,we oil every 3 days.We found that we get a ... http://expert.concreteproducts.com/admixtures/2007/07/06/cast-stone/ I have a problem with surface of my concrete driveway flaking off. Eight months after concrete was poured, the top eighth inch is flaking off, in a lot of different places. There are a lot of spots you can see that are loose and will flak off. Can you tell me what ... http://expert.concreteproducts.com/admixtures/2007/06/22/concrete-surface-flaking/ Can I apply a lithium based sealer to colored and acid stained concrete? I am currently constructing 16″ x16″ x3′ columns for a decorated fence and I want to protect it from all weather conditions Thank you Dick Dykstra http://expert.concreteproducts.com/admixtures/2007/06/04/sealers/ Hi Bruce, My name is Ron Maloney. I work for a government department in Australia (Roads and Traffic Authority).My branch delivers new roads and bridges to the state. The question Is what do you think of redosing of high strength concrete ?. The concrete has had the ... http://expert.concreteproducts.com/admixtures/2007/06/04/redosing-of-concrete-with-high-range-water-reducers/ How many 60 lb bags of premix cement NEEDED to cover a space of 28″ X 28″ X 3″ . Am using a wheel barrel to mix it in however, don’t know when to stop mixing , that is, using the water of course? Please help me….am new to this, hard ... http://expert.concreteproducts.com/admixtures/2007/06/03/how-many-60-lb-bags-needed-to-cover-a-space-of-28x28x3/ When building foundation walls there is a technique where the cinder blocks are dry-stacked and a polymer is applied to the outside for strength and waterproofing. What is this technique called and where can I find more info on this? Thanks http://expert.concreteproducts.com/admixtures/2007/04/16/foundations/ Dear Bruce, i have been working with mortars mixed with lime and different aggregates tocome up bwith my own decorative mortars lately since I work in dry and hot conditions i have problems with the mixture it still dries the way Iexpect it to dry but it has no more strenght it seems to me ... http://expert.concreteproducts.com/admixtures/2007/04/14/drying-troubles/ are there any admixes you would recommend for a concrete pillar(roughly 3ft x 3ft by 2 ft) that will be underwater twice a day –it will be used to support a boat davit. also if salt water was used in the mixing of the concrete aggregate would it ... http://expert.concreteproducts.com/admixtures/2007/04/09/concrete-in-saltwater/